DLPLC-SIMGA-1500 Siemens Plc Training System of vocational education equipment
- Dolang
- China
- 30-60DAYS
1. The experimental hanging box is a color three-dimensional diagram with a vivid image and close to the practical application of the industrial site. Through the training of this system, the students can quickly adapt to the on-site work.
2. The system adopts modern computer simulation information technology means, through the three training levels of operation, simulation, and simulation, it solves the problem of disconnection between the previous professional training theory, experiment, practice and practical application.
3. Adopt a modular structure, that is, PLC host, switch input and various analog experiment units, all of which are in the hanging box type, which can be combined according to the experimental project and network requirements. If you need to add experiments in the future, you only need to add components. Never eliminated.
4. The test screen adopts aluminum alloy structure (surface electrophoresis treatment), and the aluminum alloy slide is used to hang the test hanging box.
5. The test hanging box integrates a variety of typical PLC training modules, including the answerer, motor module, automatic water level control of the water tower, material transport trolley, and Tianta light training module, which can easily complete the basic training of PLC. The hardware load power supply uses safe voltage to ensure the safety of students.
6. Equipped with a computer CD with rich content, including PLC programming simulation, PLC configuration, training guide, PLC experiment source program.
7. The system is safe to operate (multiple personal and equipment safety protection), standardized, flexible in use, and full of modernity.
8. The system adopts special mould profiles and has been anodized and sprayed. The structure is scientific and the appearance is beautiful. The surface is sprayed with imported Dutch powder sapphire blue. There are adjusters at the bottom of the table legs and the height can be adjusted to ensure stability.
9. The system table uses 25mm fireproof board material, which is environmentally friendly, wear-resistant, corrosion-resistant, high-temperature resistant, and highly insulated. It adopts a 6mm rounded structure, which effectively eliminates the edge and cracks of the table.
10. The system uses the safety test leads and connectors customized by the company to open molds, which exceed the US military MIL standards and international IEC standards. Do not get an electric shock if touched by human hands.
DLPLC-SIMGA-1500 Siemens Plc Training System of vocational education equipment
Equipment Overview
"DLPLC-SIMGA-1500 Siemens Plc Training System of vocational education equipment " is a PLC professional training platform developed for vocational and technical education and higher education. It is specially designed for the current "programmable logic controller technology" of various colleges and universities in China. , "Principle and Application of Programmable Logic Controller", "Intermediate Maintenance Electrician", "Senior Maintenance Electrician", "PLC Application Technology", "PLC Principle and Application" and other courses are designed as a complete set.
The system integrates programmable controller (S7-1500), Botu software, and simulation control experiment board. In order to combine teaching requirements, a variety of domestic textbooks were used in the design process, and 10 groups of the most typical experiments were selected. The project, supporting communication programming cable, provides the required 24V/2A power supply, the system has the functions of leakage protection and power short-circuit protection, and has the characteristics of complete experimental projects, flexible configuration, and rich content.
Technical Parameters
1. Input power: three-phase five-wire AC380V±10% 50HZ
2. Working environment: temperature -10℃－+40℃ relative humidity<85% (25℃) altitude<4000m
3. Power control: automatic air switch on and off the power, with over-voltage protection, under-voltage protection, over-current protection, leakage protection system.
4. Output power:
(1) Three-phase AC 380V±10% 50HZ; single-phase AC 220V±10% 50HZ.
(2) DC stabilized power supply: 24V/2A
(3) One set of 0～10V adjustable DC stabilized power supply and one set of 4～20mA adjustable current.
5. Dimensions: 1800mm×700mm×1800mm
(1) Experimental table size: about 1800×800×1662mm (length×width×height);
(2) Power supply:
Input power: three-phase five-wire AC380V±10%, 50HZ;
Output power: three-phase AC 380V±10% 50HZ; single-phase AC 220V±10% 50HZ. Requires DC output stabilized power supply;
(3) Power supply control: automatic air switch on and off the power supply, with overvoltage protection, undervoltage protection, overcurrent protection, and leakage protection system;
(4) PLC: Mitsubishi FX3U-32MR, 16 inputs and 16 outputs, relay output mode
(5) Supporting analog quantity module and temperature display instrument to complete the analog quantity experiment.
Training Content
(1) PLC control motor forward and reverse control experiment
(2) PLC control motor star triangle start control experiment
(3) Display experiment of seven-segment digital tube
(4) Responder control experiment
(5) Light control experiment of Sky Tower
(6) Crossroad traffic light control experiment
(7) Water tower water level control experiment
(8) Control experiment of automatic feeding and loading system
(9) Mail sorting control experiment
(10) Siemens touch screen training
(12) The touch screen controls the temperature and pressure detection experiment through PLC
This device can meet students to do many different experiments. Each test hanging box is made according to standard size. When installing, insert the upper end of the hanging box into the upper beam aluminum profile slot, and then align the lower end of the hanging box with the lower groove. Push down to clip the hanging box on the beam. The connection between the hanging boxes is completed by K2, K4, and national standard power cords.
FAQ
Q1. What other services can Dolang provide besides teachingequipment?
Answer: Curriculum standard, teacher courseware (PPT), teaching equipment training list, examination question bank, classroom task list, students' books (learning materials), teaching software, etc
Q2. What kind of certification?
Three system certification ISO9000, ISO14001, OHSMS28001; CE certification, SGS certification and Dolang are gold medal members of worlddidac.
Q3. What can Dolang do for our teachers?
Answer: a) Dolang group has Shandong Dolang vocational school, which is specially responsible for the training of teachers. Our national teacher training courses and provincial teacher training courses all cooperate with Dolang school;
B) Dolang has a large number of Chinese vocational college resources, which can also be used for teacher training in your country.
Q4. What kinds of training methods will Dolang provide?
1. We supply you detailed manual books, video and online training service.
2. We supply you training at site, we can send engineer to your place for training
3. You can send your people come to Dolang for training.
