DLPCS-400 Filling Production Line Training System of vocational education equipment

Equipment Overview

This equipment combines the actual control requirements of the industrial site, and is oriented by modular design. It uses modern PLC control technology, sensor technology, optical technology, mechanical transmission principle technology, pneumatic technology, stepping control technology, and other elements to concentrate on the equipment. It reflects that it provides students with a broad training space and comprehensively and systematically masters the frontier knowledge of various disciplines.

1. Intuitiveness: The main equipment is installed directly exposed, and the equipment can be displayed in front of students more intuitively.

2. Miniaturization: The size of each station is 450mm×460mm×390 mm, which saves laboratory space and is easy to carry.

3. Modularization: Only through the network cable and simple mechanical docking, the assembly of a filling production line can be completed. Real-time is relatively strong.

4. Flexibility: Each station can operate independently or as a part of the production line.

5. Safety: Each station is equipped with an independent circuit breaker with short circuit and overload protection.

Technical Parameters

Input power: single phase～220V±10% 50HZ

Working environment: temperature -10℃～+40℃ relative humidity 35%～65% (25℃) altitude<4000M

Machine capacity: ≤1kVA

Air source pressure range 0.4～0.6Mpa

Overall size: 1800mm×460mm×390 mm

Single station size: 450mm×460mm×390 mm

Training Content

1. Cognition and application of pneumatic technology

●Understanding of air pump

●Awareness of air source processor

●Awareness and application of vacuum generator

●Awareness of various cylinders

●Awareness and application of solenoid valve

●Recognition and application of magnetic switch

●Awareness of tracheal insertion

●Awareness of Speed Control Joint

●Installation and debugging of solenoid valve

●Installation and debugging of cylinder

●Installation and debugging of air source treatment

●Maintenance and maintenance of various cylinders

●Maintenance and maintenance of various solenoid valves

2. Cognition and application of sensor technology

●Cognition and application of photoelectric sensor

●Cognition and application of optical fiber sensor

●The cognition and application of magnetic sensor

●Awareness and application of inductive sensors

●Wiring method of various sensors

●Fault judgment and maintenance of various sensors

●Wide application of various sensors in industrial scene

3. Cognition and application of mechanical transmission technology

●Cognition and application of belt transmission

●Awareness and application of cylinder transmission

4. The principle and application of industrial automation technology

●The principle and application of PLC

●PLC programming method and application

● PLC programming method of filling station

● PLC programming method of assembly station

● PLC programming method of transfer station

● PLC programming method for storage station

●S7-1200PLC Ethernet communication

●Application of stepper motor and stepper driver

●S7-1200PLC motion control programming method

●S7-1200PLC PID control programming method

●Configuration and application of touch screen

5. Through system training, enable students to master the following skills:

●Dynamic real-time monitoring

●Learn the programming language of PLC and PC controller

●Application of production process

●Application of mechanical and pneumatic components assembly

●Understand how to select and apply electrical appliances

●Application of Pneumatic Technology

●Application of various sensors

●The design of electrical schematic diagram and the standard requirements of component symbols

●Understand how to arrange the disk reasonably

●Installation of various sensors and adjustment of sensitivity, understand how to judge the quality of sensors and accident handling methods;

●System debugging technology: cylinder debugging; motor trial operation; mechanical position debugging; sensor debugging; collection of various signals; single station debugging and network debugging, etc.;

●Equipment fault diagnosis and maintenance

FAQ

Q1. What other services can Dolang provide besides teachingequipment?

Answer: Curriculum standard, teacher courseware (PPT), teaching equipment training list, examination question bank, classroom task list, students' books (learning materials), teaching software, etc

Q2. What kind of certification?

Three system certification ISO9000, ISO14001, OHSMS28001; CE certification, SGS certification and Dolang are gold medal members of worlddidac.

Q3. What can Dolang do for our teachers?

Answer: a) Dolang group has Shandong Dolang vocational school, which is specially responsible for the training of teachers. Our national teacher training courses and provincial teacher training courses all cooperate with Dolang school;

B) Dolang has a large number of Chinese vocational college resources, which can also be used for teacher training in your country.

Q4. What kinds of training methods will Dolang provide?

1. We supply you detailed manual books, video and online training service.

2. We supply you training at site, we can send engineer to your place for training

3. You can send your people come to Dolang for training.